Publications

@article{YAMASHITA2010370,

title = {A simple method for screening emission sources of carbonyl compounds in indoor air},

author = {Shohei Yamashita and Kazunari Kume and Toshiyuki Horiike and Nobuyuki Honma and Masahiro Fusaya and Takeshi Ohura and Takashi Amagai},

url = {http://www.sciencedirect.com/science/article/pii/S0304389410001251},

doi = {https://doi.org/10.1016/j.jhazmat.2010.01.089},

issn = {0304-3894},

year  = {2010},

date = {2010-01-01},

journal = {Journal of Hazardous Materials},

volume = {178},

number = {1},

pages = {370 - 376},

abstract = {Volatile organic compounds (VOCs) emitted from building and furnishing materials are frequently observed in high concentrations in indoor air. Nondestructive analytical methods that determine the main parameters influencing concentration of the chemical substances are necessary to screen for sources of VOC emissions. Toward this goal, we have developed a new flux sampler, referred to herein as an emission cell for simultaneous multi-sampling (ECSMS), that is used for screening indoor emission sources of VOCs and for determining the emission rates of these sources. Because the ECSMS is based on passive sampling, it can be easily used on-site at a low cost. Among VOCs, low-molecular-weight carbonyl compounds including formaldehyde are frequently detected at high concentrations in indoor environments. In this study, we determined the reliability of the ECSMS for the collection of formaldehyde and other carbonyl compounds emitted from wood-based composites of medium density fiberboards and particleboards. We then used emission rates determined by the ECSMS to predict airborne concentrations of formaldehyde emitted from a bookshelf in a large chamber, and these data were compared to formaldehyde concentrations that were acquired simultaneously by means of an active sampling method. The values obtained from the two methods were quite similar, suggesting that ECSMS measurement is an effective method for screening primary sources influencing indoor concentrations of formaldehyde.},

keywords = {Carbonyl compound, Emission source, Flux sampler, Formaldehyde, Indoor environment},

pubstate = {published},

tppubtype = {article}

}

@article{MATLOK2000486,

title = {Measuring the release of particles from indoor surfaces},

author = {S Matlok and J Kildesø and P S Larsen},

url = {http://www.sciencedirect.com/science/article/pii/S0021850200904993},

doi = {https://doi.org/10.1016/S0021-8502(00)90499-3},

issn = {0021-8502},

year  = {2000},

date = {2000-01-01},

journal = {Journal of Aerosol Science},

volume = {31},

pages = {486 - 487},

note = {European Aerosol Conference 2000},

keywords = {Indoor environment, Resuspension, Surfaces},

pubstate = {published},

tppubtype = {article}

}